I have put a blog post on the tech jam blog about creatng a project for Halloween. I am now investigating the actual electronics that will go in to this.
Essentially I will prototype this using
- 1x Arduino Nano board
- 1 x 10mm (LED)
- 1x Resistor
- Jump wire
For the code, I have found the folowing
So I will go and give this a go, and update this blog post on the results.
I have now constructed this project and it seems to be working nicely
I decided to use the Nano board tom gave me for this project as it is smaller, All the electronics goes on to 1 breadboard with the nano plugged in, plus the battery pack (4x 1.5v) fits in the pumpkin nicely.
I used the Nano With ATmega328 and it seemed to work fine.
For an overview of the different boards, please go here.